Dylon
Satin
Shoe
Colour
Instructions
Important:
Suitable for satin shoes only.
Do not use on silk shoes.
Instructions:
1. Clean shoes
prior to dyeing to ensure they are free from stains. Dye will
not cover up dirt.
2. Wearing rubber gloves, shake bottle and pour dye
into an old saucer or
small container (please note that it may stain).
3. Ensure brush is thoroughly wetted with dye before
commencing. Starting
at the back seam, apply the dye with the brush working
round to the front
of the shoe and finishing at the back seam again.
4. Dye the heel. Do not saturate the shoe with dye.
5. Immediately after the first coat, lightly re-apply
the dye to the whole shoe
using circular brush strokes.
6. Whilst wet, the result may still appear patchy, but
this will even
out once dry.
7. Leave shoes to dry away from direct heat and
sunlight.
|
|
