Dylon Fabric Colour Stripper
Instructions
·
FABRIC COLOUR STRIPPER removes colour from fabric returning
it to
a neutral shade. The more colour that is removed, the
closer you will get to
the colour on the pack of dye when dyeing.
· Chlorine bleach-free formula.
· Will treat all natural fabrics and nylon. Not
recommended for polyester,
acrylic, acetate or fabrics with special finishes.
· Some colours such as bright greens and blues,
royal blues, turquoises and
indigo (denim) may NOT be suitable for treatment.
· One pack is sufficient to remove colour from up
to 2.5kg / 5lbs of dry
weight fabric. Do NOT treat more than 2.5kg / 5lbs.
· If unsure of the fibre content of the fabric,
send a small snippet from hem
or seam to the Consumer Advice Service for further
advice.
· Always use the full contents of the pack.
Note:
Not suitable for wool or silk, polyester, acetate
acrylics or fabrics with special finishes.
Which Fabrics are suitable?
Fabric
Colour Stripper is suitable for use on cotton / viscose /
linen and nylon.
It is NOT recommended for polyesters/ acetate/ acrylic/
wool/ silk or fabrics
with special finishes such as waterproofing or dry clean
only.
How much to use?
The whole box must be used at once and will treat up to
2.5kg / 5lbs of
fabric.
Important:
Always use Fabric Colour Stripper in a well-ventilated
room. Do not breathe
fumes especially if you suffer from asthma, bronchitis or
allergies that affect
breathing. Store in a cool, dry place and out of the reach
of children.
Instructions:
1. Weigh dry articles to ensure
that they are not too heavy, ordinary kitchen
scales can be used. Put articles to be treated in the
washing machine. Set
and start the longest/hottest wash programme (85°C or
95°C).
2. After about 15 minutes dissolve the pack
contents in 2 litres of hot water
and add to machine via soap dispenser. Allow the cycle
to finish.
3. When cycle is complete, add usual washing
detergent and run your
usual wash cycle for articles.
4. The articles are now ready to be dyed. PHOSPHATE
AND CHLORINE FREE |