|
1. Apply colourless TextilDesign Color
Stop on finish-free fabric. The thickness of application may
influence the masking effect: If you apply lines or areas of 2–3 mm
thickness directly from the liner bottle they will mask entirely.
Thinner application (e.g. flat with a brush) makes trendy used-effects
i.e. the fabric is only partially masked. Allow Color Stop to dry
thoroughly (over night).
2. Now spray Textil Design
Colorspray on masked area or any other area. Make your own paper
stencil for a clear spray edge. Allow to dry.
No fixing required!
3. Soak textile in lukewarm water for
1-2 min. after drying process. Rub colour off the masked areas (e.g.
with brush or hands). Can also be washed-out in washing machine at 30°C
(gentle wash, soft spin cycle). Rinse rubbed colour particles
thoroughly. Wring out. Allow to dry. |
